A Guide about Cloud Nine Power Cable Problems

Cloud Nine power cable problem? If your Cloud Nine is turning on and off depending upon which position your cable is in then this needs replacing. You may also hear a crackling or buzzing noise when you turn them on at the mains. This is a short happening inside the Cloud Nines and may sometimes even give off a small amount of smoke or a burning smell. If you Cloud Nine cable isn’t functioning as it should we strongly recommend that you stop using them immediately and get a repair. Continuing to use faulty ghds is dangerous.
Another problem that is linked to the Cloud Nine power cable problem is the cable connector inside. This can also show similar problems of intermittent power when the cable enters the straighteners.
When we repair Cloud Nines with these symptoms we always check both the cable and the connector and often replace both parts to ensure future reliability and safety.

A Cloud Nine Power Cable Fault is often accompanied with a beep as the unit turns on and off.

Power cable problems are not always visible to the eye. If yours has cuts in the wire and obvious damage then it may be no surprise that you are having a problem with your Cloud Nine power cable. However sometimes the cable looks fine but may be damaged inside due to the Cloud Nine power cable being the part that gets so much wear and tear over the years.

If your Cloud Nines have this problem simply book a Cloud Nine repair with us and we will not only fix the problems but also check all other components to check they are working as they should be and that everything is just as it should be for reliable and safe use in the future.

<Return to GHD Problems Guide